GR5066 series of crumb rubber 



 GR5066A crumb rubber 

 I. Introduction: 

 The GR5066A crumb rubber is a non-toxic and harmless to non-polluting high polymer powder is imported resin and polyethylene vinyl acetate, styrene, acrylic acid 

 Copolymers and other polymer materials as the substrate, through a special polymer materials and enhance the material cross-linked chemical reaction modification is made with water, dispersed or dissolved into a paste are 

 Uniform body, with a surfactant, benzene board has improved hydrophilic sexual and construction. 

 Second, the applicable performance: 

 ① This product is suitable for the inorganic thermal insulation 

 ② This product is suitable for bonding of EPS / XPS sheet insulation system, the surface mortar 

 ③ This product is applicable in the tile adhesive, sealant, mortar interface 

 ④ This product is suitable for interior and exterior wall putty, masonry mortar, stucco and plaster 

 ⑤ This product is suitable for a variety of cement substrate / dry building materials 

 Third, the product features: 

 GR5066A rubber powder in the mortar of main features: 

 ① has assisted to improve redispersible latex powder the results, to improve system performance and cost savings. 

 The ② benzene board system mortar, dissolved water can penetrate into the surface of the benzene board, activity structure in the molecule can increase the hydrophilicity of the surface of the benzene board, to improve mortar 

 Interface molecular force of the surface of the benzene board, add 0.2% -0.3%, can reduce the amount of 50% of crumb rubber can greatly reduce the cost of the mortar. 

 Adhesion (3) improve the system so that the mortar has a higher maneuverability, easy to paste the construction process of sticking to the knife, not easy to decline the move, firmly bonded, safe and reliable. 

 ④ improve the elasticity and flexibility of the mortar, so that the material can withstand a certain degree of substrate deformation, impact resistance, resistance to freezing and thawing, to avoid the cracking of the protective layer, adhesive layer plate off 

 Phenomenon. 

 Fourth, the technical indicators: 
 Appearance white powder 
 Fineness of mesh ≧ 100 
 Solid content /% ≧ 98 
 Film-forming temperature / ° C 0 
 Packing density of 0.30-0.40 kg / L 


 Fifth, use: 

 GR5066A crumb rubber content of 0.2-0.3%, added directly to the mix the cement, fly ash, inorganic fillers and other materials; recommend the use of PO42.5 water 

 Mud. 

 1, the preparation of the adhesive mortar: 
 Weight of raw materials / kg 
 Cement 400 
 40-100 mesh sand 590 
 Cellulose ether 1.5 
 GR5066A 2 
 Redispersible powder QS9021 


 2, the preparation of the surface mortar: 
 Weight of raw materials / kg 
 Cement 300 
 Heavy calcium 50 
 Cellulose ethers 
 GR5066A 2 
 Redispersible latex powder QS9021 13 
 Quartz sand 50-140 mesh 635 
 Cracking fiber 0.5 


 These formulations are for reference only. 

 VI, Note: 

 (1) should be placed in dry and ventilated place, sun, moisture 

 ② After opening the package, the remaining product should immediately fastened the bags to prevent moisture deterioration 

 ③ Avoid this product into the eyes, such as access should immediately wash with clean water and help to the doctor 

 7, packing, storage, transportation 

 ① paper and plastic bags lined with polyethylene film bag, net weight 25 kg. 

 ② This product should pay attention to moisture, sun, water, shelf life is 12 months. 

 ③ This product is non-toxic, non corrosive, non-combustible. 

 ④ non-dangerous goods transport regulations apply. 



 GR5066B crumb rubber 

 I. Introduction: 

 GR5066B crumb rubber polymers for polystyrene particles, glass beads, perlite lightweight aggregate insulation mortar developed a drug-free sound pollution 

 Powder, imported resin and polyethylene vinyl acetate, styrene, acrylic acid copolymers and other polymer materials as the substrate, through a special polymer materials 

 And enhance the material cross-linking chemical reaction modification is made uniform body of water, dispersed or dissolved into a paste has higher viscosity than ordinary latex powder, and polystyrene particles, 

 Glass beads of lightweight aggregate parcel, construction and Water retention. 

 Second, the applicable performance: 

 ① This product is suitable for glass beads of insulation mortar, perlite insulation mortar 

 ② This product is suitable for particles of polystyrene insulation mortar, gypsum-based insulation mortar 

 ③ The product is suitable for the microcrystalline high-strength insulation mortar, the inorganic active thermal insulation mortar 

 Third, the product features: 

 The main features of GR5066B polymer powder in the thermal insulation mortar: 

 ① has excellent thickening by viscous cement, ash and other inorganic cementitious materials and glass beads of polystyrene particles can be bonded together with a more inclusive and improve 

 The cohesion of the mortar and deformable. 

 ② excellent water holding capacity, and solve the polystyrene particles, glass beads, perlite and other pulp products can be used time. 

 (3) improve the system performance bond, insulation mortar can be well bonded to the substrate, increase mortar resistance to cracking, sticking to the knife to improve the construction process, not sagging may 

 Sex. 

 ④ can significantly reduce the thermal insulating mortar production costs, improve performance and simplify construction. 

 Fourth, the technical indicators: 
 Appearance white powder 
 Fineness of mesh ≧ 100 
 Solid content /% ≧ 98 
 Film-forming temperature / ° C 0 
 Packing density of 0.30-0.40 kg / L 


 Fifth, use: 

 GR5066B crumb rubber is added directly to the uniform mixing can be used in the cement, fly ash, inorganic aggregate. 

 GR5066B rubber powder mixed with the amount of insulation mortar variety, proportion and requirements of different final products of the different requirements depending on the application debugging. 

 1, the preparation of particles of polystyrene insulation mortar: 
 Weight of raw materials / kg 
 Cement 650 
 Fly Ash 340 
 Cellulose ethers 4-6 
 GR5066B 4-7 
 Short fiber 
 Pulp: particles = 1kg :4-6L 

 2, the preparation of glass bead insulation mortar: (can preparation of 5-6 cubic meters) 
 Weight of raw materials / kg 
 Cement 590 
 Fly Ash 300 
 Sierozem 100 
 Cellulose ethers 
 GR5066B 4-8 
 Short fiber 
 Slurries: glass beads of 1kg :5-6L 

 3, the preparation of perlite insulation mortar: 
 Weight of raw materials / kg 
 Cement 320 
 Fly Ash 425 
 Perlite 250 
 GR5066B 4-6 
 Short fiber 

 These formulations are for reference only. 

 VI, Note: 

 (1) should be placed in dry and ventilated place, sun, moisture 

 ② After opening the package, the remaining product should immediately fastened the bags to prevent moisture deterioration 

 ③ Avoid this product into the eyes, such as access should immediately wash with clean water and help to the doctor 

 7, packing, storage, transportation 

 ① paper and plastic bags lined with polyethylene film bag, net weight 25 kg. 

 ② This product should pay attention to moisture, sun, water, shelf life is 12 months. 

 ③ This product is non-toxic, non corrosive, non-combustible. 

 ④ non-dangerous goods transport regulations apply.